Productos

Herramientas para la sincronización y el bloqueo del motor

PRODUCTOS

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

Kit de herramientas de sincronización de levas VT13897 para el mantenimiento de la sincronización y alineación del árbol de levas del motor V6 SOHC de 4,0 L de Ford.

Kit de mantenimiento de la sincronización del árbol de levas del motor V6 SOHC de 4,0 L de Ford

VT01279: juego de 16 piezas de herramientas de bloqueo para la sincronización del motor, con herramientas de bloqueo para el árbol de levas, el cigüeñal y el volante motor, aptas para múltiples modelos de vehículos europeos.

Juego de herramientas de bloqueo de la distribución del motor

Juego de herramientas de sincronización del motor VT01275 para Ford, destinado a bloquear y colocar los componentes de sincronización del motor durante el mantenimiento de la correa o la cadena de distribución.

Herramientas de sincronización del motor para Ford

VT13780: juego de 6 piezas de herramientas de bloqueo de la distribución para motores de gasolina, destinado al ajuste y mantenimiento de la distribución del motor Ford 1.6 Ti-VCT.

Juego de 6 piezas de herramientas de sincronización para motor de gasolina Ford 1.6 Ti-VCT

Kit de herramientas VT01247B para el ajuste y bloqueo de motores diésel 1.3D en modelos de Alfa Romeo, Fiat, Ford, Lancia, Suzuki, Opel y Vauxhall.

Juego de herramientas para el ajuste y bloqueo de la distribución del motor diésel 1.3D

Juego de herramientas de sincronización del motor VT13741B para el servicio de sincronización y bloqueo de los motores diésel Ford 2.2 y 3.2 TDCi.

Kit de herramientas para la sincronización del motor Ford 2.2 / 3.2 TDCi

Juego de herramientas de sincronización del motor VT01082 para Ford y Mazda, con herramientas de bloqueo y ajuste del árbol de levas, el cigüeñal y el volante motor.

Juego de herramientas para la sincronización del motor de Ford y Mazda

Juego de herramientas de bloqueo de distribución para el árbol de levas y el cigüeñal VT13741, destinado al mantenimiento de la distribución del motor diésel Ford Transit 2.2 TDCi.

Juego de herramientas de bloqueo de sincronización del árbol de levas y el cigüeñal para Ford 2.2 TDCi

VTN1095: juego de herramientas de 8 piezas para la sincronización del motor con transmisión por cadena de Jaguar Land Rover 2.0 de gasolina, que incluye una polea del cigüeñal y herramientas para el posicionamiento del sensor del cigüeñal.

Kit de distribución por cadena para JLR 2.0 GTDi (8 piezas)

Juego de herramientas de sincronización de motor VT18955 para el mantenimiento de la sincronización de los motores diésel V6 2.7D y 3.0D de Jaguar, Land Rover, Citroën y Peugeot.

Juego de herramientas de distribución de 8 piezas para JLR 2.7 y 3.0 TDV6

VT18190: Kit de herramientas de sincronización del árbol de levas para motores 2.0 de Jaguar Land Rover, destinado a determinados motores diésel y de gasolina, incluidas las aplicaciones de sincronización relacionadas con Ingenium.

Kit de distribución para motores de gasolina y diésel Ingenium 2.0 de JLR

VT18190C: Kit de herramientas para el ajuste de la distribución del motor diésel Ingenium 2.0 de Jaguar Land Rover, destinado a colocar y bloquear los componentes de la distribución durante el mantenimiento del motor.

Kit de herramientas de sincronización para motores diésel Ingenium 2.0 de JLR

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit con el VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Preguntas frecuentes

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Solicitud de presupuesto

Ponte en contacto con nuestro experto para encontrar la mejor solución a tus necesidades.