Productos

Herramientas para la sincronización y el bloqueo del motor

PRODUCTOS

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT18190B: Kit de herramientas de sincronización para motores de gasolina 2.0 Ingenium de Jaguar Land Rover, destinado a bloquear los componentes del árbol de levas y del cigüeñal durante el mantenimiento de la cadena de distribución.

Juego de herramientas de sincronización para motores de gasolina Ingenium 2.0 de JLR

VT18189: Juego de herramientas de sincronización del cigüeñal para Jaguar Land Rover 2.0 diésel, destinado al posicionamiento y bloqueo de los componentes de sincronización del motor durante el mantenimiento del sistema de sincronización.

Juego de herramientas de sincronización para motores diésel JLR 2.0

Juego de herramientas de sincronización del árbol de levas del motor VT13559 para determinados motores de gasolina 2.0T de Jaguar, Land Rover, Ford y Volvo, y aplicaciones de sincronización relacionadas.

Kit de herramientas de sincronización para Jaguar Land Rover 2.0 GTDi

Herramienta de ajuste del árbol de levas VT18744 para motores VW, Audi y Porsche 3.0T compatibles, destinada al ajuste del árbol de levas y al mantenimiento de la distribución.

Herramienta para el manguito de ajuste del árbol de levas para VW, Audi y Porsche 3.0T EA839

VT13559B: juego de herramientas de sincronización para el motor Ford 2.0 EcoBoost, destinado al bloqueo y posicionamiento de los componentes de sincronización de los motores de gasolina SCTi EcoBoost y Ti-VCT.

Juego de herramientas de distribución para Ford, Jaguar y Land Rover de 2,0 L

VT01870: juego de 13 piezas de herramientas para la sincronización de motores de gasolina, destinado a la sincronización y alineación del árbol de levas de los motores V6 KV6 de 2,0 L y 2,5 L de Rover y Land Rover.

Juego de 13 piezas de herramientas para la sincronización del motor Rover KV6

VT01746 Kit de herramientas para el sincronismo del árbol de levas del motor V8 de 5,0 L de Jaguar Land Rover, destinado al bloqueo, la alineación y el ajuste de los componentes del sincronismo del motor durante el mantenimiento del sincronismo.

Kit de herramientas de sincronización para motores V8 de 5,0 L de Jaguar Land Rover

Juego de herramientas de sincronización con bloqueo para el motor VT17882 de los modelos Porsche Macan, Cayenne y Panamera con motores 3.0T y 3.6L, compatible con las referencias de herramientas 9861 y 9863.

Juego de herramientas para el bloqueo de la distribución del motor del Porsche Macan

VT01883: Juego de herramientas de sincronización para motores Porsche, diseñado para el posicionamiento preciso del árbol de levas y el cigüeñal durante el mantenimiento y la reparación del sistema de sincronización.

Juego de herramientas para la sincronización del motor Porsche 987 / 981 / 997 / 991

VT01751C: Herramienta auxiliar de Porsche para tensar la cadena de distribución, destinada a fijar y realizar el mantenimiento de la cadena de distribución durante la reparación y el mantenimiento del motor.

Herramienta para el tensor de la cadena de distribución auxiliar de Porsche

VT01750: Juego de herramientas Porsche para la sincronización del motor, destinado al posicionamiento y bloqueo del árbol de levas y del cigüeñal, así como al servicio profesional de sincronización del motor.

Juego de herramientas para la sincronización del motor V8 de Porsche Cayenne / Panamera

VT01745: Juego de herramientas de sincronización de levas Jaguar Land Rover V8 para motores de gasolina de 3,2 L, 3,5 L, 4,0 L, 4,2 L y 4,4 L, destinado a la sincronización del árbol de levas y el cigüeñal.

Kit de herramientas para la sincronización del árbol de levas del motor V8 de Land Rover / Jaguar

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit con el VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Preguntas frecuentes

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Solicitud de presupuesto

Ponte en contacto con nuestro experto para encontrar la mejor solución a tus necesidades.