Products

Engine Timing and Locking Tools

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT18190B Jaguar Land Rover 2.0 Ingenium petrol engine timing tool kit for locking camshaft and crankshaft components during timing chain service.

JLR 2.0 Ingenium Petrol Timing Tool Set

VT18189 Jaguar Land Rover 2.0 diesel crankshaft timing tool set for positioning and locking engine timing components during timing system service.

JLR 2.0 Diesel Timing Tool Set

VT13559 engine camshaft timing tool kit for selected Jaguar, Land Rover, Ford and Volvo 2.0T petrol engines and related timing applications.

Jaguar Land Rover 2.0 GTDi Timing Tool Kit

VT18744 camshaft adjustment sleeve tool for compatible VW Audi and Porsche 3.0T engines for camshaft adjustment and timing service.

Camshaft Adjustment Sleeve Tool for VW Audi Porsche 3.0T EA839

VT13559B Ford 2.0 EcoBoost engine timing tool set for locking and positioning SCTi EcoBoost and Ti-VCT petrol engine timing components.

Ford Jaguar Land Rover 2.0L Timing Tool Set

VT01870 13PC petrol engine timing tool set for Rover and Land Rover KV6 2.0L and 2.5L V6 engine timing and camshaft alignment.

13PC Rover KV6 Engine Timing Tool Set

VT01746 Jaguar Land Rover 5.0L V8 camshaft timing tool kit for locking, aligning and setting engine timing components during timing service.

Jaguar Land Rover 5.0L V8 Timing Tool Kit

VT17882 engine locking timing tool kit for Porsche Macan, Cayenne and Panamera 3.0T and 3.6L engines, compatible with tool references 9861 and 9863.

Porsche Macan Engine Timing Locking Tool Kit

VT01883 Porsche engine timing tool set for accurate camshaft and crankshaft positioning during timing system maintenance and repair.

Porsche Engine Timing Tool Set 987 / 981 / 997 / 991

VT01751C Porsche auxiliary timing chain tensioner tool for securing and servicing the timing chain during engine repair and maintenance.

Porsche Auxiliary Timing Chain Tensioner Tool

VT01750 Porsche engine timing tool set for camshaft and crankshaft positioning, locking and professional engine timing service.

Porsche Cayenne / Panamera V8 Engine Timing Tool Set

VT01745 Jaguar Land Rover V8 cam timing tool kit for 3.2L, 3.5L, 4.0L, 4.2L and 4.4L petrol engines for camshaft and crankshaft timing.

Land Rover / Jaguar V8 Camshaft Timing Tool Kit

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit with the VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Frequently asked questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Request For Quote

Contact to our expert get the best solution for your requirements.