Products

Engine Timing and Locking Tools

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01595G diesel engine timing locking tool set with black holding wrench, metal locking plate, timing pins and alignment accessories in a black carrying case for engine timing belt service.

13PC Ford Engine Timing Locking Tool Kit for 1.5L 1.6L EcoBoost Engines

VT01273C engine timing dial indicator tool set with precision dial gauge, long extension rod, adjustment components and metal fixtures in a black carrying case for engine timing measurement and adjustment.

5PC VW Audi FSI TFSI Engine Timing Tool Kit with Dial Gauge

VT01979 11.5mm belt pulley counterholding wrench for holding belt pulleys during service on selected Volkswagen and Audi vehicles.

Camshaft Belt Pulley Counterholding Wrench for VW Audi

VT01882 Adjustable universal camshaft holding tool for securing camshaft pulleys and sprockets during timing belt and engine service.

Adjustable Universal Camshaft Pulley Holding Tool for VAG Engines

VT01367 Universal camshaft pulley holder with pin-type design for holding camshaft pulleys during loosening and tightening of mounting bolts.

Universal Camshaft Pulley Holding Tool for OHC Engines

VT01105 Timing belt fitting tool with long-reach shaft for installing and positioning timing belts in confined engine areas.

Long Reach Timing Belt Fitting Tool

VT17155 3/8 inch drive 41mm water pump wrench designed for water pump adjustment and service on compatible GM 1.6L engines.

41mm Water Pump Adjustment Wrench for GM Chevrolet

VT01975 Rover MG 1.8 SOHC engine timing tool set for holding and setting timing components during engine service.

Engine Timing Tool Set for Rover MG 1.8 SOHC

VT17656 Auxiliary stretch belt removal and installation tool set with pulley support and adapters for servicing stretch-fit drive belts.

7PC Universal Stretch Belt Removal and Installation Tool Kit

VT13124 5PC universal camshaft sprocket puller set for removing camshaft sprockets, gears and pulleys during engine service.

5PC Universal Camshaft Sprocket Puller Tool Set

VT01850 10PC damper pulley puller wrench set for holding and removing automotive crankshaft damper pulleys.

10PC Damper Pulley Wrench Set with Interchangeable Heads

VT01993D Universal camshaft pulley holding tool set with adjustable holding arms and interchangeable pins for pulley and sprocket service.

Universal Camshaft Pulley Holding Wrench Set 40-220mm

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit with the VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Frequently asked questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Request For Quote

Contact to our expert get the best solution for your requirements.