Products

Engine Timing and Locking Tools

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VIKTEC VT01784D camshaft alignment and engine timing tool kit with locking fixtures and timing tools in carrying case.

BMW N51–S55 Engine Timing Tool Set

Engine timing locking tool kit for Land Rover 3.0L and 5.0L engines

Land Rover Jaguar 3.0L & 5.0L Petrol Engine Timing Tool Set

Camshaft alignment tool kit for VW Audi Seat Skoda Porsche TDI common rail engines

VAG Porsche TDI Common Rail Camshaft Alignment and Timing Tool Set

VIKTEC VT13515 18PC glow plug socket set with jointed sockets and extension tools for removing and installing diesel engine glow plugs.

18PC Glow Plug Socket & PSG Sensor Glow Plug Tool Set

VIKTEC VT13148 78mm oil pan separator tool designed for separating bonded oil pans and engine covers during automotive repair and maintenance.

48mm Oil Pan & Gasket Separator Tool

VIKTEC VT18269B pneumatic diesel injector puller and extractor kit with assorted threaded adapters for removing seized common rail fuel injectors during engine repair.

24PC Pneumatic Vibration Diesel Injector Puller Set

VIKTEC VT01765B diesel injector seat cutter and cleaning tool kit with reamers, brushes, guide rods and T-handle in carrying case.

Diesel Injector Seat Cutter & Cleaning Tool Set

VIKTEC VT01273G engine timing tool set with camshaft setting tools and dial indicator for VW Audi VAG engine timing adjustment and service.

5PC VW Audi EA111 FSI TFSI Engine Timing Tool Set

VIKTEC VT19443C 8 position automotive injector service tray with numbered slots for organizing fuel injectors during engine repair and maintenance.

Universal Cylinder Head Parts Storage System Upgraded Version

VT01283 engine timing tool kit for Fiat and Alfa Romeo with timing tools arranged in an open carrying case

Engine Timing Tool Kit for Fiat Alfa Romeo

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit with the VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Frequently asked questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Request For Quote

Contact to our expert get the best solution for your requirements.