Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VIKTEC VT01784D Nockenwellenausrichtungs- und Motor-Steuerzeiten-Werkzeugsatz mit Spannvorrichtungen und Steuerzeitenwerkzeugen im Transportkoffer.

BMW N51–S55 Motor-Einstellwerkzeugsatz

Werkzeugsatz zum Arretieren der Nockenwellenposition für Land Rover-Motoren mit 3,0 l und 5,0 l Hubraum

Land Rover Jaguar 3,0 l & 5,0 l Benzinmotor-Steuerzeiten-Werkzeugsatz

Nockenwellen-Ausrichtungssatz für Common-Rail-Motoren von VW, Audi, Seat, Skoda und Porsche TDI

VAG Porsche TDI Common-Rail-Nockenwellen-Ausrichtungs- und Steuerzeiten-Werkzeugsatz

VIKTEC VT13515 18-teiliger Glühkerzen-Steckschlüsselsatz mit Gelenksteckschlüsseln und Verlängerungsstangen zum Aus- und Einbau von Glühkerzen in Dieselmotoren.

18-teiliges Glühkerzen-Steckschlüssel- und PSG-Sensor-Glühkerzen-Werkzeugset

VIKTEC VT13148 78-mm-Ölwannen-Trennwerkzeug zum Trennen festsittender Ölwannen und Motorabdeckungen bei der Reparatur und Wartung von Kraftfahrzeugen.

48-mm-Werkzeug zum Trennen von Ölwanne und Dichtung

VIKTEC VT18269B – Pneumatisches Abzieh- und Ausziehset für Dieseleinspritzdüsen mit verschiedenen Gewindeadaptern zum Ausbau festsitzender Common-Rail-Einspritzdüsen bei der Motorreparatur.

24-teiliges Set mit pneumatischem Vibrationsabzieher für Dieseleinspritzdüsen

VIKTEC VT01765B – Satz mit Schneid- und Reinigungswerkzeugen für Dieselinjektorsitze, bestehend aus Reibahlen, Bürsten, Führungsstangen und einem T-Griff, im Transportkoffer.

Satz mit Schneidwerkzeug und Reinigungswerkzeug für Einspritzdüsensitze von Dieselmotoren

VIKTEC VT01273G Motor-Steuerzeiten-Werkzeugsatz mit Nockenwellen-Einstellwerkzeugen und Messuhr für die Einstellung und Wartung der Motor-Steuerzeiten bei VW, Audi und VAG-Motoren.

5-teiliges VW-Audi-EA111-FSI-TFSI-Motor-Einstellwerkzeug-Set

VIKTEC VT19443C 8-fach Kfz-Einspritzdüsen-Servicetablett mit nummerierten Steckplätzen zur Organisation von Einspritzdüsen bei Motorreparatur und Wartung.

Universelles Aufbewahrungssystem für Zylinderkopfbauteile, verbesserte Version

VT01283 Motor-Steuerzeiten-Werkzeugsatz für Fiat und Alfa Romeo mit in einem offenen Transportkoffer angeordneten Werkzeugen

Motor-Einstellsatz für Fiat und Alfa Romeo

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.