Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT18601B Ford 1,5-Liter-3-Zylinder-EcoBoost-Benzinmotor – Steuerzeiten-Werkzeugsatz

Ford 1,5-Liter-3-Zylinder-EcoBoost-Benzinmotor – Steuerzeiten-Einstellsatz

VT18601 Ford 1,5-Liter-3-Zylinder-EcoBoost-Benzinmotor – Steuerzeiten-Werkzeugsatz

Ford 1,5-Liter-3-Zylinder-EcoBoost-Motor – Steuerzeiten-Einstellsatz

VT01734 – Werkzeugsatz zum Einstellen und Arretieren der Ventilsteuerzeiten bei Benzinmotoren für die Wartung von Alfa Romeo-Motoren

Alfa Romeo Benzinmotor – Nockenwellen-Einstell- und Arretierungswerkzeugsatz

VT19564 Kurbelwellen-Drehwerkzeug für die Wartung von IVECO-Motoren und die Positionierung der Kurbelwelle

Iveco-Werkzeug zum Drehen der Kurbelwelle

VT20647 Nockenwellen-Einstell- und Ausrichtungswerkzeugsatz mit Halterungen für Einlass- und Auslassnockenwellen sowie langen Gegenhebelarmen für die Motor-Steuerzeitenwartung

Volvo B5 2.0T 48V Motor-Steuerzeiten-Werkzeugsatz

VT13773 Volvo B4204 Nockenwellen-Ausrichtungswerkzeugsatz zum Ausrichten der Positionen von Nockenwelle und Kurbelwelle bei der Motor-Timing-Wartung

Volvo B4154 & B4204 Nockenwellen-Ausrichtungs- und Steuerzeiten-Werkzeugsatz

VT01595D Nockenwellen-Arretierungswerkzeugsatz für Ford 1,5-l- und 1,6-l-Ti-VCT-Motoren mit Riemenantrieb in den Modellen Fiesta, Focus und C-Max

Ford 1,5-l- und 1,6-l-Ti-VCT-Motor-Steuerzeiten-Werkzeugsatz

VT01595C-Motor-Nockenwellen-Arretierungssatz für Ford 1,5-l- und 1,6-l-EcoBoost-Ti-VCT-Motoren sowie kompatible Volvo-Modelle zum Austausch des Zahnriemens

Ford & Volvo 1,6 l EcoBoost SCTi Ti-VCT Motor-Steuerzeiten-Werkzeugsatz

VT18730-Motor-Steuerzeiten-Werkzeugsatz für Mercedes-Motoren der Baureihen M157, M276 und M278 mit Werkzeugen zur Ausrichtung und Arretierung der Nockenwellen

Mercedes-Benz M157/M276/M278 – Werkzeugsatz für die Nockenwelleneinstellung und den Ausbau der Einspritzdüsen

VT01751B Nockenwellen-Einstellsatz für Porsche Cayenne und Panamera mit 3,6-l-, 4,5-l- und 4,8-l-V6- und V8-Motoren

Porsche Cayenne & Panamera 3,6 l, 4,5 l, 4,8 l – Motor-Einstellwerkzeugsatz

VT13562D-Satz für die Motorsteuerung von Ford- und Land Rover-2.0T-EcoBoost- und Ti-VCT-Benzinmotoren

Land Rover & Ford 2,0-Liter-EcoBoost-SCTi-Ti-VCT-Motor-Steuerzeiten-Werkzeugsatz

VT01863D-Steuerzeiten-Werkzeugsatz für 1,2-Liter-Turbomotoren von Peugeot und Citroën mit Nockenwellen- und Kurbelwellen-Arretierwerkzeugen

Peugeot Citroën 1,0 l & 1,2 l VTi-Motor-Einstellwerkzeugsatz mit Zündkerzenhülse

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.