Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01595G diesel engine timing locking tool set with black holding wrench, metal locking plate, timing pins and alignment accessories in a black carrying case for engine timing belt service.

13PC Ford Engine Timing Locking Tool Kit for 1.5L 1.6L EcoBoost Engines

VT01273C engine timing dial indicator tool set with precision dial gauge, long extension rod, adjustment components and metal fixtures in a black carrying case for engine timing measurement and adjustment.

5PC VW Audi FSI TFSI Engine Timing Tool Kit with Dial Gauge

VT01979 11,5-mm-Riemenscheiben-Halteschlüssel zum Festhalten von Riemenscheiben bei Wartungsarbeiten an ausgewählten Volkswagen- und Audi-Fahrzeugen.

Gegenhalteschlüssel für die Nockenwellenriemenscheibe für VW und Audi

VT01882 Verstellbares Universal-Nockenwellen-Haltewerkzeug zum Sichern von Nockenwellenriemenscheiben und Kettenrädern bei Arbeiten am Zahnriemen und am Motor.

Verstellbares Universal-Nockenwellenriemenscheiben-Haltewerkzeug für VAG-Motoren

VT01367 Universeller Nockenwellenriemenscheibenhalter mit Stiftbefestigung zum Halten von Nockenwellenriemenscheiben beim Lösen und Anziehen der Befestigungsschrauben.

Universelles Haltewerkzeug für Nockenwellenriemenscheiben bei OHC-Motoren

VT01105 Zahnriemen-Montagewerkzeug mit langem Schaft zum Einbau und zur Ausrichtung von Zahnriemen in beengten Motorräumen.

Montagewerkzeug für Zahnriemen mit großer Reichweite

VT17155 3/8-Zoll-Antrieb, 41 mm Wasserpumpenschlüssel, entwickelt für die Einstellung und Wartung der Wasserpumpe bei kompatiblen GM-1,6-Liter-Motoren.

41-mm-Einstellschlüssel für Wasserpumpen von GM Chevrolet

VT01975 Rover MG 1,8 SOHC-Motor-Steuerzeiten-Werkzeugsatz zum Halten und Einstellen von Steuerzeitenkomponenten bei der Motorwartung.

Zündzeitpunkt-Einstellsatz für Rover MG 1,8 SOHC

VT17656 Hilfswerkzeugsatz zum Aus- und Einbau von Spannriemen mit Riemenscheibenhalterung und Adaptern für die Wartung von Spannriemen.

7-teiliges Universal-Werkzeugset zum Aus- und Einbau von Stretch-Riemen

VT13124 5-teiliges Universal-Abziehset für Nockenwellenräder zum Ausbau von Nockenwellenrädern, Zahnrädern und Riemenscheiben bei der Motorwartung.

5-teiliges Universal-Abzieherset für Nockenwellenräder

VT01850 10-teiliges Abziehschlüssel-Set für Dämpferriemenscheiben zum Festhalten und Abziehen von Dämpferriemenscheiben an Kurbelwellen in Kraftfahrzeugen.

10-teiliges Schwungrad-Schraubenschlüssel-Set mit austauschbaren Köpfen

VT01993D Universelles Nockenwellenriemenscheiben-Haltewerkzeugset mit verstellbaren Haltearmen und austauschbaren Stiften für Wartungsarbeiten an Riemenscheiben und Kettenrädern.

Universelles Nuss-Set für Nockenwellenriemenscheiben, 40–220 mm

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.