Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01867 1.3-Dieselmotor-Steuerzeiten-Werkzeugsatz für die Wartung der Motor-Steuerzeiten bei Ford, Fiat, Suzuki sowie GM JTD-, CDTI- und TDCI-Motoren.

Zündzeitpunkt-Einstellsatz für Ford / Fiat / Suzuki / GM 1,3-Liter-Diesel

VT01350B Motor-Einstellwerkzeugsatz für Ford- und Mazda-Benzin- und Dieselmotoren mit 1,4 l, 1,6 l, 1,8 l und 2,0 l Hubraum.

18-teiliges Steuerzeiten-Werkzeugset für Ford / Mazda

VT01350 Motor-Einstellwerkzeugsatz für Ford und Mazda zum Arretieren von Nockenwelle, Kurbelwelle, Schwungrad und Steuerkette bei Motorwartungsarbeiten.

Zündzeitpunkt-Einstellsatz für Ford / Mazda

VT01284 – Satz von Werkzeugen zur Arretierung der Ventilsteuerung für Benzin- und Dieselmotoren von Ford, Mazda und Volvo, einschließlich 1.8 D TD TDCi-Modelle.

Zündzeitpunkt-Einstellwerkzeugsatz für Ford / Mazda

VT01281 17-teiliger Werkzeugsatz zum Einstellen und Arretieren von Dieselmotoren für 2,2-l-, 2,3-l- und 3,0-l-Motoren mit Riemen- und Kettenantrieb.

17-teiliges Werkzeugset zum Einstellen und Arretieren von Dieselmotoren

VT18725B – Werkzeug zum Aus- und Einbau der Ausgleichswelle für Jaguar Land Rover AJ200 2,0-Liter-Dieselmotoren.

2.0 Diesel-Ausgleichswelle-Einstellwerkzeug für Jaguar Land Rover

VT18646 7-teiliger Satz an Triebwellen-Einstellwerkzeugen für die Wartung des 2,0-Liter-Dieselmotors „Ingenium 204DTD“ von Jaguar Land Rover.

7-teiliges Werkzeugset zur Einstellung der Ausgleichswelle für Land Rover 2,0-Diesel

VT18190F-Motor-Steuerzeiten-Werkzeugsatz für die Nockenwellen- und Steuerzeitenwartung des 2,0-Ingenium-Motors von Jaguar Land Rover.

Land Rover 3,0-Liter-I6-Motor-Steuerzeiten-Einstellwerkzeug

VT14065 – Werkzeug zum Arretieren und Ausbau der Kraftstoffpumpe für Jaguar Land Rover 2.0 Ingenium AJ200-Dieselmotoren.

Werkzeug zum Entriegeln und Ausbau der Kraftstoffpumpe für den 2,0-Liter-Diesel-Ingenium-Motor AJ200

VT13003-Nockenwellenausrichtungswerkzeuge für die Einstellung der Ventilsteuerzeiten und die Positionierung der Nockenwelle beim Land Rover 4,0-Liter-Motor.

Werkzeuge zur Nockenwellenausrichtung für Land Rover 4,0 l

VT01972 Nockenwellen-Positionierungswerkzeug für die Wartung der Ventilsteuerzeiten und die Ausrichtung der Nockenwelle beim Land Rover 3.6 V8-Dieselmotor.

Land Rover V8 3,6-Liter-Diesel – Nockenwellen-Einstellsatz

VT01502 Land Rover V8-Motor-Steuerungswerkzeugsatz zum Arretieren und Positionieren von Motor-Steuerungskomponenten bei Wartungs- und Reparaturarbeiten an der Ventilsteuerung.

Land Rover V8-Motor-Steuerzeiten-Werkzeugsatz

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.