Produits

Outils de réglage et de blocage du moteur

PRODUITS

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01867 : kit d'outils de réglage de la distribution pour moteurs diesel 1,3 L destinés à l'entretien des moteurs JTD, CDTI et TDCI de Ford, Fiat, Suzuki et GM.

Kit d'outils de réglage de la distribution pour Ford / Fiat / Suzuki / GM 1,3 diesel

Kit d'outils de réglage de la distribution moteur VT01350B pour les moteurs essence et diesel Ford et Mazda de 1,4 L, 1,6 L, 1,8 L et 2,0 L.

Jeu de 18 outils de réglage de la distribution pour Ford / Mazda

Jeu d'outils de réglage de distribution VT01350 pour Ford et Mazda, destiné au blocage de l'arbre à cames, du vilebrequin, du volant moteur et du système de distribution lors des interventions sur le moteur.

Jeu d'outils de réglage de la distribution pour Ford / Mazda

Kit d'outils de blocage de la distribution moteur VT01284 pour moteurs essence et diesel Ford, Mazda et Volvo, y compris les modèles 1.8 D TD TDCi.

Jeu d'outils de blocage de la distribution moteur pour Ford / Mazda

VT01281 : jeu de 17 outils de réglage et de blocage pour moteurs diesel de 2,2 L, 2,3 L et 3,0 L à entraînement par courroie ou par chaîne.

Jeu de 17 outils pour le réglage et le blocage des moteurs diesel

Outil VT18725B pour le démontage et le montage de l'arbre d'équilibrage sur les moteurs diesel Jaguar Land Rover AJ200 2,0 L.

Outil de réglage de la distribution de l'arbre d'équilibrage pour moteurs diesel 2,0 pour Jaguar Land Rover

VT18646 : kit d'outils de réglage de la courroie de distribution de l'arbre d'équilibrage (7 pièces) pour l'entretien du moteur diesel Ingenium 2.0 L 204DTD de Jaguar Land Rover.

Kit d'outils de réglage de l'arbre d'équilibrage du moteur (7 pièces) pour Land Rover 2,0 diesel

Kit d'outils de réglage de la distribution moteur VT18190F pour l'entretien de l'arbre à cames et de la distribution du moteur 2.0 Ingenium de Jaguar Land Rover.

Outil de réglage de la distribution pour moteur Land Rover 3,0 L I6

Outil VT14065 de déverrouillage et de démontage de la pompe à carburant pour les moteurs diesel Jaguar Land Rover 2.0 Ingenium AJ200.

Outil de déverrouillage et de démontage de la pompe à carburant pour moteur 2.0 Diesel Ingenium AJ200

Outils d'alignement d'arbre à cames VT13003 destinés au réglage de la distribution et au positionnement de l'arbre à cames du moteur Land Rover 4,0 L.

Outils d'alignement d'arbre à cames pour Land Rover 4,0 L

Outil de positionnement d'arbre à cames VT01972 destiné à l'entretien de la distribution et à l'alignement de l'arbre à cames du moteur diesel Land Rover 3.6 V8.

Kit d'outils de positionnement de l'arbre à cames pour Land Rover V8 3,6 diesel

VT01502 Kit d'outils de réglage de la distribution pour moteur Land Rover V8, destiné au blocage et au positionnement des composants de la distribution lors des opérations d'entretien et de réparation de la distribution.

Jeu d'outils de réglage de la distribution pour moteur V8 Land Rover

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit avec le VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Foire aux questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Demande de devis

Contactez notre expert pour trouver la solution la mieux adaptée à vos besoins.