Produits

Outils de réglage et de blocage du moteur

PRODUITS

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01501 : Kit d'outils de réglage de l'arbre à cames Porsche M97/01, destiné au réglage et au blocage de la position des arbres à cames lors de l'entretien du calage moteur.

Jeu d'outils de réglage de l'arbre à cames pour moteur Porsche M97/01

VT01500B : jeu d'outils de réglage d'arbre à cames Porsche 4,5 L et 4,8 L, destiné au blocage et à l'alignement des arbres à cames, ainsi qu'à l'entretien du calage moteur.

Jeu d'outils de réglage de la distribution pour Porsche Cayenne / Panamera V8 4,5 L et 4,8 L

VT01500 : kit d'outils de réglage des arbres à cames Porsche, destiné au blocage et à l'alignement des arbres à cames lors du réglage de la distribution et de l'entretien de celle-ci.

Jeu d'outils de réglage de l'arbre à cames pour Porsche Cayenne / Audi Q7

VT18279 : kit d'outils de réglage de la distribution VAG pour les moteurs compatibles 1.2 TSI, TFSI, 1.4 TSI, FSI et 1.6 FSI, destiné à l'alignement de la distribution des arbres à cames et du vilebrequin.

Kit d'outils de réglage de la distribution moteur VAG 1.2, 1.4 et 1.6 FSI/TSI (8 pièces)

Kit de distribution pour moteur diesel VT01277 destiné aux moteurs BMW, Land Rover et Vauxhall Opel de 1,8 L, 2,0 L et 2,5 L à entraînement par chaîne, pour la distribution de l'arbre à cames et du vilebrequin.

Kit de distribution pour moteur diesel BMW, Land Rover et Vauxhall/Opel

VT18131 : kit d'outils de réglage de la distribution 7 pièces pour les moteurs diesel Audi et Volkswagen 3.0 TDI, destiné au blocage de l'arbre à cames et du vilebrequin lors de l'entretien de la distribution.

Jeu de 7 outils de réglage de la distribution pour moteurs Audi et VW 3.0 TDI

VT01184 Kit d'outils de blocage de calage pour moteur diesel Jaguar Land Rover 2,7 L, destiné à l'alignement de l'arbre à cames, au réglage du moteur et à l'entretien de la courroie de distribution.

Kit de réglage/blocage pour moteur diesel Jaguar / Land Rover

VT18074 : jeu de 4 outils de réglage d'arbre à cames pour moteurs essence VAG 1,4 L TSI et TFSI, y compris les modèles Audi, VW, Seat et Skoda compatibles.

Jeu de 4 outils de réglage de calage d'arbre à cames pour VAG 1.4 TSI TFSI

VT17910 : jeu d'outils de réglage de la distribution VAG EA839 pour les moteurs Porsche, Audi et VW 2.9 TFSI et 3.0 TFSI, utilisé pour le blocage de l'arbre à cames lors de l'entretien de la chaîne de distribution.

Kit d'outils de réglage de la distribution pour moteur VAG EA839 2,9 et 3,0 TFSI

VT13993B : Kit d'outils de réglage de la distribution pour moteurs VW et Audi 1,8 L et 2,0 L TSI/TFSI EA888, permettant le blocage de l'arbre à cames et du vilebrequin lors de l'entretien de la distribution.

VW Audi EA888 1.8T 2.0T Engine Timing Tool Kit

Kit d'outils d'alignement de l'arbre à cames VT13986 pour VW Touareg, Phaeton et Audi A8, compatible avec la référence d'origine T10068A.

Kit d'outils d'alignement de l'arbre à cames VW Audi T10068A

VT13985 VAG 1,2 L et 1,4 L TFSI : jauge de contrôle de l'allongement de la chaîne de distribution, permettant de vérifier l'usure et l'allongement de la chaîne de distribution sur les moteurs à entraînement par chaîne.

Kit d'outils de mesure de l'usure de la chaîne de distribution pour VAG 1.2 et 1.4 TFSI

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit avec le VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Foire aux questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Demande de devis

Contactez notre expert pour trouver la solution la mieux adaptée à vos besoins.