Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01501 Porsche M97/01 Motor-Nockenwellen-Einstellwerkzeugsatz zum Einstellen und Arretieren der Nockenwellenpositionen bei der Motor-Einstellung.

Porsche M97/01 Motor-Nockenwellen-Einstellwerkzeugsatz

VT01500B Porsche 4,5-l- und 4,8-l-Nockenwellen-Einstellwerkzeugsatz zum Arretieren und Ausrichten der Nockenwellen sowie zur Einstellung der Motorverteilung.

Nockenwellen-Einstellwerkzeugsatz für Porsche Cayenne / Panamera 4,5 l und 4,8 l V8

VT01500 Porsche-Nockenwellen-Einstellwerkzeugsatz zum Arretieren und Ausrichten von Nockenwellen bei der Motor-Zündeinstellung und beim Zündservice.

Nockenwellen-Einstellwerkzeugsatz für Porsche Cayenne / Audi Q7

VT18279 VAG-Motor-Einstellsatz für kompatible 1.2 TSI-, TFSI-, 1.4 TSI-, FSI- und 1.6 FSI-Motoren zur Ausrichtung von Nockenwelle und Kurbelwelle.

8-teiliges Motor-Einstellwerkzeug-Set für VAG 1.2, 1.4 und 1.6 FSI/TSI-Motoren

VT01277-Steuerungssatz für Dieselmotoren von BMW, Land Rover und Vauxhall Opel mit 1,8 l, 2,0 l und 2,5 l Hubraum und Kettenantrieb zur Steuerung von Nockenwelle und Kurbelwelle.

Steuerungssatz für Dieselmotoren von BMW, Land Rover und Vauxhall/Opel

VT18131 7-teiliger Satz von Werkzeugen zur Motorsteuerung für Audi- und Volkswagen-3,0-TDI-Dieselmotoren zum Arretieren von Nockenwelle und Kurbelwelle bei der Wartung der Motorsteuerung.

7-teiliges Audi-VW-3.0-TDI-Motor-Steuerzeiten-Werkzeugset

VT01184 Jaguar Land Rover 2,7-Liter-Dieselmotor: Werkzeugsatz zur Nockenwellenausrichtung, Motoreinstellung und Wartung des Zahnriemens.

Einstell- und Arretierungssatz für Dieselmotoren von Jaguar / Land Rover

VT18074 4-teiliges Nockenwellen-Einstellwerkzeugset für VAG-Benzinmotoren mit 1,4 l TSI- und TFSI-Technik, einschließlich kompatibler Audi-, VW-, Seat- und Skoda-Modelle.

4-teiliges VAG 1.4 TSI TFSI Nockenwellen-Einstellwerkzeug-Set

VT17910 VAG EA839 Motor-Steuerzeiten-Werkzeugsatz für Porsche-, Audi- und VW-Motoren der Baureihen 2.9TFSI und 3.0TFSI, zur Arretierung der Nockenwelle bei der Wartung der Steuerkette.

VAG EA839 2,9 3,0 TFSI Motor-Steuerzeiten-Werkzeugsatz

VT13993B VW Audi 1,8 l und 2,0 l TSI/TFSI EA888 Motor-Einstellwerkzeugsatz zum Arretieren von Nockenwelle und Kurbelwelle bei der Motorvermessung.

VW Audi EA888 1.8T 2.0T Motor-Einstellwerkzeug-Set

VT13986 Nockenwellen-Ausrichtungs- und Steuerzeiten-Werkzeugsatz für VW Touareg, Phaeton und Audi A8, kompatibel mit der OEM-Teilenummer T10068A.

VW Audi Nockenwellen-Ausricht- und Einstellwerkzeugsatz T10068A

VT13985 VAG 1,2 l und 1,4 l TFSI-Steuerketten-Dehnungsmessgerät zur Überprüfung des Verschleißes und der Dehnung der Steuerkette bei kettengetriebenen Motoren.

VAG 1.2 1.4 TFSI Messset zur Ermittlung des Verschleißes der Steuerkette

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.