Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01530 VW Audi 3.2 FSI Motor-Steuerzeiten-Werkzeugsatz zum Ausrichten, Arretieren und Einstellen der Nockenwellen während der Motorwartung.

Audi 2.4 & 3.2 FSI Motor-Steuerzeiten-Werkzeugsatz

VT01529 Wartungssatz für Bremssattelkolben mit Einstellstange, Druckplatten und Zubehör, geliefert in einem blasgeformten Aufbewahrungskoffer.

Steuerungs-Werkzeugsatz für VW und Audi

VT14170 Mercedes-Benz M137, M275, M285 Nockenwellen-Arretierwerkzeugsatz für die Motor-Steuerzeiten-Wartung

3-teiliges Mercedes-Benz M275/M285 V12-Nockenwellen-Einstell- und Arretierwerkzeugset Produktkategorie

VT14098C Mercedes-Benz M177 M178 4,0 l V8-Nockenwellenausrichtungs- und -Arretierungssatz für AMG C63, C63S und S560L

Mercedes-Benz M176/M177/M178 4,0-Liter-V8-Nockenwellen-Einstell- und Spannwerkzeugsatz

VT14098 Mercedes-Benz M177/M178 Nockenwellen-Einstellsatz für AMG 4,0-Liter-V8-Motoren

Mercedes-Benz AMG M176/M177/M178 4,0-Liter-V8-Nockenwellen-Einstellwerkzeugsatz

VT13994 Mercedes-Benz OM651 Werkzeugsatz für die Steuerkettenführung zum Austausch der Steuerkette und zur Positionierung der Nockenwelle

Mercedes-Benz OM651 Werkzeugsatz zum Austausch der Steuerkette

VT01976 Honda Acura Haltevorrichtung für die Kurbelwellenriemenscheibe mit Schwingungsdämpfer zum Aus- und Einbau der Riemenscheibe

50-mm-Schlüssel zum Festhalten der Kurbelwellenriemenscheibe für Honda und Acura

VT18720 Mercedes-Benz M254 M256 Motor-Einstellsatz für die Nockenwellen- und Kurbelwellen-Einstellung

Mercedes-Benz M256 Nockenwellen- und Kurbelwellen-Einstellwerkzeugsatz

VT18168 Mercedes-Benz M152, M157, M276, M278 Nockenwellen-Einstellwerkzeugsatz für die Nockenwellenausrichtung und den Ventilspielausgleich

4-teiliges Mercedes-Benz M152, M157, M276, M278 Nockenwellen-Einstell- und Ausrichtungswerkzeugset

VT18068B Mercedes-Benz M654 1,6 l und 2,0 l Diesel-Motor-Einstellsatz für die Positionierung von Nockenwelle und Kurbelwelle

Mercedes-Benz M654 1,6 l & 2,0 l Diesel-Motor-Steuerzeiten-Einstellsatz

VT17093 Mercedes-Benz M651 CDI – Werkzeugsatz zum Arretieren der Nockenwelle und zum Festhalten der Kurbelwellenriemenscheibe

Mercedes-Benz M651 CDI Nockenwellen- und Kurbelwellen-Einstellsatz

VT14204 Mercedes-Benz M642 Diesel-Motor-Steuerzeiten-Werkzeugsatz für die Wartung der Motor-Steuerzeiten bei den Modellen GL320, GL350, ML350 und ML450

Mercedes-Benz M642 CDI Diesel – Nockenwellen-Einstellsatz

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.