Produkte

Werkzeuge für die Motorvermessung und -arretierung

PRODUKTE

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT18190B Jaguar Land Rover 2.0 Ingenium-Benzinmotor-Steuerungswerkzeugsatz zum Arretieren von Nockenwellen- und Kurbelwellenkomponenten bei der Wartung der Steuerkette.

JLR 2.0 Ingenium Benziner-Steuerzeiten-Werkzeugsatz

VT18189 Jaguar Land Rover 2,0-Diesel-Kurbelwellen-Nockenwellen-Einstellwerkzeugsatz zum Ausrichten und Arretieren von Motor-Steuerungskomponenten bei der Wartung des Steuerungssystems.

JLR 2.0-Diesel-Steuerzeiten-Werkzeugsatz

VT13559 Nockenwellen-Einstellsatz für ausgewählte 2,0-T-Benzinmotoren von Jaguar, Land Rover, Ford und Volvo sowie für entsprechende Anwendungen im Bereich der Nockenwelleneinstellung.

Jaguar Land Rover 2.0 GTDi Steuerzeiten-Werkzeugsatz

VT18744 Nockenwellen-Einstellhülsenwerkzeug für kompatible 3.0T-Motoren von VW, Audi und Porsche zur Nockenwelleneinstellung und zum Timing-Service.

Werkzeug zur Einstellung der Nockenwellenhülse für VW, Audi und Porsche 3.0T EA839

VT13559B Ford 2.0 EcoBoost-Motor-Steuerzeiten-Werkzeugsatz zum Arretieren und Positionieren von SCTi EcoBoost- und Ti-VCT-Benzinmotor-Steuerzeitenkomponenten.

Ford Jaguar Land Rover 2,0-Liter-Steuerzeiten-Werkzeugsatz

VT01870 13-teiliger Satz von Werkzeugen zur Ventilsteuerung für Benzinmotoren von Rover und Land Rover mit KV6-V6-Motoren (2,0 l und 2,5 l) zur Einstellung der Ventilsteuerung und zur Ausrichtung der Nockenwelle.

13-teiliges Rover KV6-Motor-Steuerzeiten-Werkzeugset

VT01746 Jaguar Land Rover 5,0 l V8-Nockenwellen-Einstellsatz zum Arretieren, Ausrichten und Einstellen der Motor-Steuerungskomponenten bei der Steuerungswartung.

Jaguar Land Rover 5,0-Liter-V8-Steuerzeiten-Werkzeugsatz

VT17882-Motor-Verriegelungs- und Einstellwerkzeugsatz für Porsche Macan, Cayenne und Panamera mit 3,0-T- und 3,6-L-Motoren, kompatibel mit den Werkzeugnummern 9861 und 9863.

Porsche Macan – Werkzeugsatz zum Arretieren der Nockenwellen

VT01883 Porsche-Motor-Einstellwerkzeugsatz zur präzisen Positionierung von Nockenwelle und Kurbelwelle bei Wartungs- und Reparaturarbeiten am Ventilsteuerungssystem.

Porsche-Steuerzeiten-Werkzeugsatz 987 / 981 / 997 / 991

VT01751C Porsche-Hilfswerkzeug zum Spannen der Steuerkette zum Sichern und zur Wartung der Steuerkette bei Reparatur- und Wartungsarbeiten am Motor.

Porsche-Werkzeug zum Spannen der Hilfs-Steuerkette

VT01750 Porsche-Motor-Einstellwerkzeugsatz zum Ausrichten und Arretieren von Nockenwelle und Kurbelwelle sowie für die professionelle Motor-Einstellung.

Porsche Cayenne / Panamera V8-Motor-Steuerzeiten-Werkzeugsatz

VT01745 Jaguar Land Rover V8-Nockenwellen-Einstellsatz für 3,2-l-, 3,5-l-, 4,0-l-, 4,2-l- und 4,4-l-Benzinmotoren zur Einstellung von Nockenwelle und Kurbelwelle.

Land Rover / Jaguar V8-Nockenwellen-Einstellwerkzeugsatz

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit mit dem VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Häufig gestellte Fragen

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Angebotsanfrage

Wenden Sie sich an unseren Experten, um die beste Lösung für Ihre Anforderungen zu finden.