Products

Engine Timing and Locking Tools

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01501 Porsche M97/01 engine camshaft timing tool set for setting and locking camshaft positions during engine timing service.

Porsche M97/01 Engine Camshaft Timing Tool Set

VT01500B Porsche 4.5L and 4.8L camshaft timing tool set for camshaft locking, alignment and engine timing service.

Camshaft Timing Tool Set for Porsche Cayenne / Panamera 4.5L & 4.8L V8

VT01500 Porsche camshaft timing tool set for locking and aligning camshafts during engine timing adjustment and timing service.

Camshaft Timing Tool Set for Porsche Cayenne / Audi Q7

VT18279 VAG engine timing tool kit for compatible 1.2 TSI TFSI, 1.4 TSI FSI and 1.6 FSI engines for camshaft and crankshaft timing alignment.

8PC VAG 1.2 1.4 1.6 FSI TSI Engine Timing Tool Kit

VT01277 diesel engine timing kit for BMW, Land Rover and Vauxhall Opel 1.8L, 2.0L and 2.5L chain-drive engines for camshaft and crankshaft timing.

Diesel Engine Timing Kit for BMW, Land Rover & Vauxhall/Opel

VT18131 7PC engine timing tool kit for Audi and Volkswagen 3.0 TDI diesel engines for camshaft and crankshaft locking during timing service.

7PC Audi VW 3.0 TDI Engine Timing Tool Set

VT01184 Jaguar Land Rover 2.7L diesel engine timing locking tool kit for camshaft alignment, engine setting and timing belt service.

Diesel Engine Setting/Locking Kit for Jaguar / Land Rover

VT18074 4PC camshaft timing tool set for VAG 1.4L TSI and TFSI petrol engines, including compatible Audi, VW, Seat and Skoda applications.

4PC VAG 1.4 TSI TFSI Camshaft Timing Tool Set

VT17910 VAG EA839 engine timing tool set for Porsche, Audi and VW 2.9TFSI and 3.0TFSI engines, used for camshaft locking during timing chain service.

VAG EA839 2.9 3.0 TFSI Engine Timing Tool Set

VT13993B VW Audi 1.8L and 2.0L TSI TFSI EA888 engine timing tool set for camshaft and crankshaft locking during engine timing service.

VW Audi EA888 1.8T 2.0T Engine Timing Tool Kit

VT13986 camshaft alignment timing tool kit for VW Touareg, Phaeton and Audi A8, compatible with OEM reference T10068A.

VW Audi Camshaft Alignment Timing Tool Set T10068A

VT13985 VAG 1.2L and 1.4L TFSI timing chain elongation testing gauge for checking timing chain wear and elongation on chain-driven engines.

VAG 1.2 1.4 TFSI Timing Chain Wear Measuring Tool Set

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit with the VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Frequently asked questions

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Request For Quote

Contact to our expert get the best solution for your requirements.