Produtos

Ferramentas de sincronização e bloqueio do motor

PRODUTOS

Shop camshaft alignment, crankshaft locating and pulley holding tools for selected engines. Use the engine code and service tool references to compare fixtures for the job.

VT01498D engine camshaft locking timing tool kit with metal locking brackets, alignment tools, bolts and positioning fixtures in a black carrying case for engine timing maintenance.

Fiat 1.1 1.2 1.4 8V Engine Timing Belt Locking Tool Kit

Conjunto de ferramentas VT01273C para medição da sincronização do motor, com medidor de dial de precisão, haste de extensão longa, componentes de ajuste e acessórios metálicos, numa mala de transporte preta, destinado à medição e ao ajuste da sincronização do motor.

Conjunto de 5 peças de ferramentas para regulação da distribuição do motor VW Audi FSI TFSI com medidor de agulha

VT01979 Chave de fixação para polias de correia de 11,5 mm, destinada a imobilizar as polias de correia durante a manutenção em determinados veículos Volkswagen e Audi.

Chave de fixação da polia da correia da árvore de cames para VW e Audi

VT01882 Ferramenta universal ajustável de fixação da árvore de cames para imobilizar as polias e as rodas dentadas da árvore de cames durante a manutenção da correia de distribuição e do motor.

Ferramenta ajustável para fixação da polia universal do eixo de comando para motores VAG

VT01367 Suporte universal para polias da árvore de cames com design do tipo pino, destinado a fixar as polias da árvore de cames durante o afrouxamento e o aperto dos parafusos de fixação.

Ferramenta universal de fixação da polia da árvore de cames para motores OHC

VT01105 Ferramenta de montagem de correias dentadas com eixo de longo alcance para a instalação e posicionamento de correias dentadas em espaços apertados do motor.

Ferramenta de montagem de correias dentadas de longo alcance

Chave para bomba de água VT17155, com encaixe de 3/8 polegadas e 41 mm, concebida para o ajuste e manutenção da bomba de água em motores GM de 1,6 L compatíveis.

Chave de ajuste da bomba de água de 41 mm para GM Chevrolet

VT01975 Conjunto de ferramentas de sincronização para o motor Rover MG 1.8 SOHC, destinado a segurar e ajustar os componentes de sincronização durante a manutenção do motor.

Conjunto de ferramentas de regulação da distribuição do motor para o Rover MG 1.8 SOHC

VT17656 Conjunto de ferramentas auxiliares para remoção e instalação de correias elásticas, com suporte para polias e adaptadores para a manutenção de correias de transmissão elásticas.

Conjunto de 7 peças de ferramentas universais para remoção e instalação de correias elásticas

VT13124 Conjunto universal de 5 peças para extrair rodas dentadas, engrenagens e polias da árvore de cames durante a manutenção do motor.

Conjunto de 5 peças de ferramentas universais para extrair rodas dentadas de árvores de cames

VT01850 Conjunto de 10 chaves para extrair polias do amortecedor, destinado a segurar e remover polias do amortecedor do virabrequim de veículos automóveis.

Conjunto de 10 peças de chaves para polias de amortecedor com cabeças intercambiáveis

VT01993D Conjunto universal de ferramentas de fixação para polias de árvore de cames, com braços de fixação ajustáveis e pinos intercambiáveis, para manutenção de polias e rodas dentadas.

Conjunto de chaves de fixação universais para polias de árvore de cames, 40-220 mm

Match the fixtures to the timing procedure

Start with the engine code and the job: a belt change, a chain repair, camshaft work or a timing check. A kit must contain the parts the vehicle procedure calls for, including anything used to position the crankshaft, align the camshafts or hold a sprocket. Two engines with the same displacement can require different fixtures, and a case labelled with a single engine family may cover only selected versions.

Locating pins, plates and gauges

A pin can identify a reference position while a plate engages the camshafts in a specified orientation. A procedure may also call for a measurement rather than relying on fixed alignment alone. Compare the VT01498D Fiat 8V timing belt locking kit com o VT01273C VW and Audi FSI/TFSI timing kit with dial gauge. The point of the comparison is the work the fixtures do. Check each product’s stated applications and the manual before you order either set.

Counterholds and pulley service

When the procedure requires a tool to react the load from a fastener, look for the specified counterhold. The VT01979 VW and Audi camshaft pulley counterholding wrench illustrates that separate purchasing line. Check engagement geometry and access as well as the fastener operation. A timing pin or plate should not be used to resist fastener torque unless the applicable service and tool instructions say to do so.

Catalogue timing kits by fitment and tool function

Include engine code, any verified service tool numbers, one clear image of the working ends, and a list of fixtures with their functions. Identify a separate holder, tensioner tool or measuring fixture if the job calls for one. Avoid listing a set as covering an entire engine platform where only selected codes are documented. If the buyer begins with a brand or model, use vehicle-specific tool categories to narrow the search. The engine service tool catalogue includes testers and other jobs that fall outside camshaft and crankshaft positioning.

For repeat wholesale orders, send us the engine codes and service tool references you need to match. Include the job, intended market and quantities. A packing list or a diagram reference can be useful when two kits contain similar plates or pins.

Perguntas frequentes

Can one camshaft locking set handle both a belt job and a chain job?

Only if the fitment and required tool references match each procedure. A kit that aligns a camshaft may still lack a tensioner, crankshaft or pulley fixture used in the other job.

What makes an engine code more useful than displacement?

It distinguishes designs that are often grouped under the same nominal size. Use the code together with the market, vehicle identifier and current service information when matching the tools.

Can a universal pulley holder replace every engine-specific fixture?

Check the intended operation, the working range and engagement with the actual pulley. A holder that fits the pulley does not establish a timed position or replace a fixture specified for locating a camshaft.

Why might a kit include a dial gauge?

Some procedures call for a measured reference position or movement. Check the gauge, adapter and any other tools called out by the procedure before deciding whether a kit is complete for that job.

Is a larger piece count a reliable indication of wider coverage?

No. Additional parts can be extensions, different locating pins or accessories for the same application. Compare itemised contents and verified uses between sets.

How should we compare two sets that list the same OEM tool number?

Compare exactly which component carries that reference. Check working-end dimensions, offsets and application notes; one shared component does not mean the remaining fixtures interchange.

Can we quote a timing set without the engine information?

You can ask about a known VIKTEC SKU or provide verified OEM tool numbers. An application recommendation needs the engine and job information because a model badge alone leaves several possibilities open.

Solicitação de Orçamento

Entre em contato com nossos especialistas e obtenha a melhor solução para suas necessidades.