Products

BMW Special Tools

PRODUCTS

BMW special tools help workshops carry out engine timing, bushing and drivetrain jobs that require application-specific alignment or access. VIKTEC supplies selected BMW and MINI service tools for distributors, importers and private-label tool brands. Browse by engine family or repair task, then use the product code to request the relevant kit details. Our range includes N-series and B-series timing tools as well as dedicated chassis and rear differential tools.

VIKTEC 5PC engine timing tool kit for BMW N43 engines with camshaft locking and timing alignment tools for engine timing service

BMW N43 1.6L 2.0L Engine Timing Tool Set

VIKTEC BMW crankshaft pulley counter holder tool for holding torsional vibration damper pulleys during loosening and tightening of pulley bolts

BMW Crankshaft Pulley Holding Tool OEM 116310

VIKTEC 11PC engine timing tool kit for MINI and PSA N12 EP3 EP6 petrol engines including 1.4 VTi and 1.6 THP applications

11PC MINI PSA N12 EP3 EP6 Engine Timing Tool Kit

VIKTEC 13PC diesel engine timing tool kit for BMW M41 M47 M51 and M57 engines for camshaft crankshaft and timing chain service

BMW M41 M51 M47 M57 Diesel Engine Timing Tool Set

VIKTEC BMW N20 N26 engine timing tool kit for locking camshafts crankshaft and VANOS timing components during engine timing service

BMW N20 N26 Engine Timing Tool Set

VIKTEC 8PC engine timing tool set for BMW N13 and N18 engines for camshaft crankshaft and timing alignment service

BMW N13 N18 Engine Timing Tool Set

VIKTEC diesel engine timing tool kit for BMW M47 and M57 2.0D and 3.0D engines for camshaft and crankshaft timing alignment

M47 M57 Diesel Engine Timing Tool Set for BMW Land Rover MG

VIKTEC BMW locking wheel bolt removal tool for removing damaged rounded or missing-key anti-theft wheel bolts without damaging the wheel

High-Security Spinning Ring Wheel Lock Removal Tool Set

VIKTEC engine timing tool kit for BMW N53 and N54 engines with camshaft alignment tools in carrying case

BMW N51 N52 N53 N54 N55 Engine Timing Tool Set

VTN1124 BMW N42 N46 and N46T engine timing tool kit with camshaft alignment bridge, locking tools and timing pins in an open carrying case

BMW N42 N46 N46T timing tool set

VTN1105C BMW N20 and N26 4-cylinder turbo engine timing tool kit with camshaft alignment fixture, locking rail and timing pins in an open carrying case

BMW N20 Engine Timing Tool Set for Timing Chain Service

VT01812F BMW N51 N52 N53 N54 N55 engine timing tool kit with camshaft alignment plates, locking tools and spark plug sleeve in an open carrying case

BMW N51 N52 N53 N54 N55 Timing Tool Set with Spark Plug Socket

Select BMW Special Tools by Application

The products below provide starting points for a BMW service range. Engine-family names help narrow the selection; final fitment also depends on the engine variant, production details and work being performed.

Service Requirement	VIKTEC Product	Selection Point
N47, N47S, N57 and N57S diesel timing	VT13745 timing tool set	Selected chain-driven diesel engines; check the complete engine code.
B38, B48 and B58 petrol timing	VT13565B camshaft alignment set	Camshaft alignment and variable timing unit service; confirm the specific BMW or MINI application.
Control arm bushing replacement	VT01708 bushing tool set	Check the suspension application and required press sleeves.
Rear differential output shaft service	VT20789 removal and installation set	Selected flangeless, snap-ring retained output shafts.

Match BMW Timing Tools to the Engine and Procedure

Keep N-series and B-series requirements separate when building your stock list. VT13745 covers selected N47/N57-family diesel applications, while VT13565B addresses selected B38/B48/B58 petrol applications. A broad label such as “BMW timing kit” does not identify the correct component set.

Camshaft alignment, crankshaft positioning and variable camshaft timing work also need to be distinguished. VT13565B is listed for camshaft alignment and variable timing unit service. Check which locating, holding and service components the workshop procedure calls for before choosing a BMW camshaft tool or complete kit.

Where pulley bolts require a separate holding or reaction tool, list it alongside the timing kit. A positioning pin and a pulley holding tool serve different purposes. The required combination should follow the engine-specific repair instructions.

BMW and MINI applications can appear in the same tool listing. Match the full engine code and product application details rather than extending BMW coverage to every MINI model. For work organized by function, browse the wider engine timing and locking category.

Add Chassis and Differential Tools to the Range

BMW bushing tools give a distributor another service category beyond engine timing. VT01708 uses a threaded spindle with press sleeves, receiving cups and adapters for compatible control arm bushings. Select the set around the suspension application and bushing dimensions, including the space available for the receiving cup.

Rear differential work needs its own application checks. VT20789 is intended for selected snap-ring retained output shafts and includes removal and installation components. Confirm the shaft retention arrangement and differential application before adding it to a workshop package.

For a specialist garage customer, identify the suspension and differential jobs performed most frequently. Use those requirements to select the initial tool range and prioritize additional applications.

Private Label Supply for BMW Service Ranges

VIKTEC offers timing, chassis and drivetrain tools within the same catalog, with OEM and ODM support for tool brands developing their own range. Discuss product marking, case or carton design, manual language and kit configuration against the selected product codes.

Keep engine codes visible in your purchasing records and proposed packaging information. For mixed BMW and MINI applications, use the confirmed application list for each tool. Minimum quantities, samples and production timing can be discussed for the selected kits and branding requirements.

Frequently Asked Questions

Do BMW N-series and B-series engines use the same timing kit?

Do not assume that they do. For the products featured here, VT13745 addresses selected N47/N57-family diesel engines, while VT13565B addresses selected B38/B48/B58 petrol applications. Choose by the complete engine code and required service operation.

Which tools are used for BMW VANOS alignment?

VANOS work requires the alignment and timing-unit service tools specified for the particular engine. VT13565B supports camshaft alignment and variable camshaft timing unit service on selected B38/B48/B58 applications. Send the engine code and intended operation to check the required components.

Are BMW and MINI applications interchangeable?

Some tool sets list applications for both brands, but this does not make all BMW and MINI engines interchangeable. Confirm the engine variant, production details and service requirements against the individual product’s application information.

Does a camshaft alignment kit include the crankshaft pulley holding tool?

Not necessarily. Kit contents vary, and a timing-positioning component may not perform the pulley-holding function required during bolt removal or tightening. Review the component list and specify any additional pulley service tools in your inquiry.

Can you supply BMW bushing tools alongside timing kits?

Yes. The VIKTEC range includes BMW control arm bushing tools such as VT01708 as well as engine timing sets. Provide the suspension application and required bushing dimensions when selecting the chassis tools for your order.

Which details are needed to select a BMW differential output shaft tool?

Send the vehicle and differential information, shaft retention arrangement and any OE service-tool references. VT20789 is listed for selected flangeless, snap-ring retained output shafts, so the shaft and differential design are important selection details.

Can you check a kit against an OE service-tool reference?

Yes. Include the OE tool reference, full engine code or component application, and the repair task. We can review these details against the proposed VIKTEC product and identify any additional information needed.

Can BMW service tools be supplied with our logo and packaging?

Yes. VIKTEC offers private-label options for product marking, packaging, manuals and kit configuration. Send your artwork, preferred packaging format and quantities for the selected tool sets.

What should I include in a BMW tools wholesale inquiry?

List the VIKTEC product codes, quantities and destination market. Add the engine or chassis applications you want to cover, along with branding and packaging requirements, so the quotation can be organized around your intended product range.

Can we evaluate samples before ordering a branded range?

You can request samples to review tool configuration, application suitability and packaging before a bulk order. We will confirm the sample arrangement and any customization requirements for the selected products.

Request a BMW special tools quotation. Send the VIKTEC codes and quantities, together with engine or chassis details and your destination market. Include any OE tool references needed for the repair jobs you want to cover, or request the catalog to review additional BMW applications.

Request For Quote

Contact to our expert get the best solution for your requirements.