Ford Special Tools

Compare Ford Special Tools by Engine Application

Use this shortlist to identify the relevant tool group. Match the full engine code and repair procedure before selecting a kit for a workshop or wholesale range.

Engine or Service Job	VIKTEC Product	Main Selection Check
Ford 1.0 EcoBoost GTDi cambelt service	VT14073 timing tool kit	Belt-driven application and required timing references.
Ford 1.0 EcoBoost chain timing	VT18067 timing tool set	Listed for selected B7DA and B3DA engine applications.
Ford 1.5 EcoBoost three-cylinder timing	VT18601 timing tool set	Selected chain-driven engines; confirm cylinder count and engine code.
Ford 2.0 EcoBlue diesel timing	VT14200 timing tool set	Selected wet-belt diesel applications.
Ford 1.0 EcoBoost crankshaft pulley work	VT18692 torque multiplier	Pulley operation, reaction arrangement and required adapters.

Separate EcoBoost Belt and Chain Timing Requirements

Ford 1.0 EcoBoost timing tools should be grouped by the camshaft drive system. VT14073 is intended for cambelt service, while VT18067 addresses selected chain-driven engines. Ordering by “1.0 EcoBoost” alone leaves an important application detail unresolved.

For VT18067, the VIKTEC listing identifies B7DA and B3DA engine codes. Check the complete code against the required job rather than extending the listing to every Ford model with a 1.0 engine. Belt and chain kits may contain different locating and variable timing components.

The same approach applies to 1.5 EcoBoost timing tools. VT18601 is listed for selected three-cylinder, chain-driven applications. Keep cylinder count, engine code and the specific timing operation together on the quotation request; displacement alone is insufficient.

Include the Tools Needed Beyond Timing Alignment

An engine timing kit and a crankshaft pulley service tool perform different jobs. Check whether the repair procedure requires separate pulley holding, reaction or torque-multiplication equipment in addition to camshaft and crankshaft positioning tools.

VT18692 is listed for Ford 1.0 EcoBoost crankshaft pulley removal and installation, with a torque multiplier, reaction arm and drive adapter. Ask for the applicable setup and component details when adding it to a timing-service package. The engine procedure should determine the required torque and angle settings.

For diesel work, VT14200 includes flywheel locking, crankshaft alignment and belt-installation components for selected 2.0 EcoBlue applications. Identify a Transit-family vehicle by its exact model, engine code and year when requesting tools; the Transit name alone does not define the engine or kit.

The VT01499A Ford and Mazda timing set provides another option for selected applications. Check the engine match and required components before specifying one kit for applications across both brands.

Supply a Ford Service Range Under Your Brand

VIKTEC brings petrol timing, diesel timing and related pulley tools into one sourcing catalog. For distributors, these can be quoted as separate product lines so customers can choose the required engine application and any additional service tools.

Through our OEM and ODM services, discuss logo marking, packaging, manual language and tool-set configuration. On proposed product labels, make the engine family and belt or chain application easy to identify. This helps purchasing and workshop teams distinguish similar-looking kits.

Frequently Asked Questions

Are Ford 1.0 EcoBoost belt and chain timing kits interchangeable?

Do not treat them as interchangeable. VT14073 is listed for cambelt service, while VT18067 is listed for selected chain-driven applications. Match the engine code, camshaft drive system and required repair procedure before choosing the kit.

Which engine codes are listed for VT18067?

The VIKTEC product listing identifies B7DA and B3DA for selected chain-driven Ford 1.0 EcoBoost applications. Send the complete engine and vehicle details if your requirement uses another code so it can be reviewed separately.

How do I select tools for a Ford 1.5 EcoBoost three-cylinder engine?

Confirm that the engine is the relevant three-cylinder version, then check its complete code and timing arrangement. VT18601 is intended for selected chain-driven three-cylinder applications; the “1.5 EcoBoost” name alone is not a sufficient match.

Which extra tools are needed for EcoBoost crankshaft pulley service?

The required tools depend on the engine procedure and may include separate pulley holding, reaction or torque-multiplication equipment. VT18692 is an option for selected Ford 1.0 EcoBoost pulley work. Confirm the required adapters and setup for the intended operation.

Does a Ford timing kit include a torque multiplier?

A torque multiplier should not be assumed to be included. Timing kits and pulley service tools are separate product groups unless the quoted kit specification explicitly combines them. Include both requirements when requesting a service-tool package.

How do I confirm the correct tools for a Transit engine?

Provide the exact Transit-family model, year, engine code, displacement and repair task. These details distinguish the relevant engine application and help identify whether you need timing, pulley, injector or other service tools.

Which Ford 2.0 EcoBlue timing applications should I check?

VT14200 is listed for selected Ford 2.0 EcoBlue diesel engines with a wet-belt timing system. Check the complete engine code and required belt-service procedure, including the flywheel locking, crankshaft alignment and belt-installation components.

Can Ford and Mazda applications share a timing kit?

Some sets, including VT01499A, list selected Ford and Mazda applications. Confirm the engine and required tool references for each application before combining coverage in your catalog or workshop range.

Can Ford tool sets be supplied with private-label packaging?

Yes. VIKTEC offers logo, packaging, instruction-manual and kit-configuration options. Send your selected products, quantities and artwork, and specify how you want the engine applications identified on the packaging.

What details are needed for a wholesale quote and samples?

Provide the product codes, quantities, destination market and engine applications you want to cover. Add any branding or packaging requirements and identify which kits you want to sample. We will confirm the applicable minimum quantities and sample arrangements.

Request a Ford special tools quotation. Send your product shortlist with engine codes, estimated quantities and target market. Include any OE service-tool references and packaging requirements, or request the VIKTEC catalog for additional applications.